![]() |
|
|
|
#1
|
||||
|
||||
Need Torque Numbers: Front Struts
Need Torque Numbers: Front Struts
As part of my major car repair (head gasket), i am changing front struts and strut mounts since i have the car on stands already... what are the torque values for the front strut-to-knuckle bolts? the factory CD is confusing on this a bit as it states that the m12 bolts should be at 110 NM, whereas the m14 bolt should be at 200NM...the confusing part is that these in reality are 19mm bolts so i am not sure what the m12, and m14 numbers refer to? thanks, |
#2
|
|||
|
|||
I think you wandered into the wrong forum, since you don't state what car you have, and most Mercedes don't have struts. You might try www.toyotanation.com.
__________________
08 W251 R350 97 W210 E320 91 W124 300E 86 W126 560SEL 85 W126 380SE Silver 85 W126 380SE Cranberry 79 W123 250 78 W123 280E 75 W114 280 |
#3
|
||||
|
||||
car is a 300e 2.8 1993. with the M104 engine.........
yes, i understand that my Mercedes does not have the typical McPherson strut combination... i need the torque numbers for bolts attaching the front shocks (Sachs/Booge) to the steering knuckle .. thanks |
#4
|
|||
|
|||
without having 'actual information' I would say that wherever you bought these shock absorbers from could tell you that...it's actually probably on the installation pamphlet, although I could see that it might say 'See Your Models Owner Manual' for detail... and yeah...Mercedes (at least mine) has what they call a 'Modified McPhearson Strut'. The strut (shock) is mounted to bay/fender directly, ala conventional strut but the spring is external to the strut..it's a strut without a spring....
|
![]() |
Bookmarks |
|
|