|
|
|
#1
|
|||
|
|||
What to change with Timing Cover Seal
My '88 300E has about 128K miles and it has the typical leak where the timing cover meets the cylinder block. Since I am going in to replace the seal, what else should I consider replacing while I have it apart? I am thinking of replacing the timing chain and wondered about the gears. Any help would be appreciated.
__________________
Eric '88 300E '00 Expedition '86 Alfa Romeo Spider '84 Harley Davidson FLH"X" Special Edition '70 FJ40 Land Cruiser (basket case) |
#2
|
|||
|
|||
Is your leak at the top timing cover or the bottom timing cover? The top timing cover is no big deal as long as you use a "slick before cured" sealant on the bottom useal so that the cover while slide rearward into place without disturbing the useal.
The M103 has a ratcheting tensioner and is probably the most durable timing chain system on any of the MB's. However, the chain is cheap and since you will have the cover off for access, it wouldn't be a problem to roll in a new chain. If you do, remove the tensioner mechanism, it will require some odd size Allens. Once removed, push the plunger all the way out of the ratcheting mechanism, and reinsert from the back. If you do not take this tension off, you will break something. Good luck, |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
124 Front Cover Leak- Where exactly? | csnow | Tech Help | 18 | 11-07-2003 09:01 AM |
94 e320 valve cover gasket change observations | neumann | Tech Help | 0 | 01-05-2003 10:53 PM |
Head bolt washer behind timing chain cover! | iodyn | Tech Help | 3 | 03-08-2002 03:09 PM |
timing chain cover | Becker | Tech Help | 2 | 09-20-2001 10:00 PM |
Fixing a leaky timing chain cover | mplafleur | Tech Help | 6 | 09-09-2001 03:54 PM |