|
|
|
#1
|
|||
|
|||
replacing feul injectors 91 300E
My 91 300E is having hard 'hot starts'. Stalls at times only immediately after starting. I was told that I had good pressure and the foul injectors should be replaced. I'm not much of a mechanic, but changing the foul injectors seem like something I can handle. I've never done it before. Is it as straight forward as it seems or is it a tricky operation. I have a straight 6 gas engine.
|
#2
|
|||
|
|||
Pretty straight forward. Be sure you replace the seals also.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#3
|
|||
|
|||
Seals?
Do the seals come with the injectors?
|
#4
|
|||
|
|||
Yes the seals will normally be sold separately. Item# 14 = 116 070 00 77.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
#5
|
|||
|
|||
Will do
Thank you very much for the info and picture. I will be giving it a go next week. Feeling optimistic.
Steve |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacing fuel injectors and camshaft oilers in a 1990 560SEL | Thomaspin | Tech Help | 4 | 02-17-2003 03:53 PM |
Replacing Front Flex Disk on 300E | ejsharp | Tech Help | 13 | 09-10-2002 07:41 PM |
replacing 300e water pump- NEED input | ebennz | Tech Help | 11 | 10-09-2001 12:27 PM |
Fuel Injectors 300E | Abaloneman | Tech Help | 11 | 09-17-2001 10:21 AM |
1986 300E Fuel Injectors | Neal B | Featured Cars | 1 | 07-15-1999 11:14 AM |