So my blower motor has not worked since I bought this car (92 300 te 4matic), I had varified that the 2 blue fuses for the blower are good, and that there is power going into the interior heater control switch assembly. But today I got into the blower, and found no power reaching the motor, (I tested both the red and blue wires at the motor, and the 3 pin loom (red,black,yello)that runs from the motor area over to it's mount just behind the master cylinder.) No power or ground at any of these places. I ran direct power to the motor also, using first the motor body as a ground and then the blue wire (though I assyume it is actually a second speed power wire), but it does not spin.
I need this car as a daily and could really use some advice on the next thing to check.
Thanks, Michael