Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-05-2009, 08:28 PM
Registered User
 
Join Date: Jul 2006
Location: Seattle, WA
Posts: 19
W203 (C230K) Engine rattle (timing chain?)

A few days ago I'm driving one quiet day with the music off, and hear this very quiet rattling noise coming from the engine. The noise appears on very brief moment just when I push the accelerator pedal, quickly disappears, and comes back for a moment when I release the pedal. Over the weekend I tried to pinpoint the location of the noise - looks like it is coming from the timing chain area. Interesting thing that when the car is not moving, I need to rev the engine higher to get the noise - about 2200 rpm.
I had issue with the cold start timing chain rattle year ago. I have replaced the chain tensioner and the valve adjuster. Could the new tensioner gone bad? Or this noise can be caused by something else?
The cold start noise was similar, but much louder than this one.

__________________
2002 C230K
Reply With Quote
  #2  
Old 10-05-2009, 09:36 PM
Registered User
 
Join Date: Jul 2004
Location: NC
Posts: 1,140
I dont know, but mine did this with no failures for over 100k........common on this engine
Reply With Quote
  #3  
Old 10-06-2009, 11:33 AM
Registered User
 
Join Date: Jul 2008
Posts: 1,236
I'd get a mechanic's stethoscope and try to pinpoint where exactly it is coming from. Sounds bounce around in an engine compartment and sometimes noises seem to come from completely different areas than where they actually originate.
__________________
-tp


1990 300SE "Corinne"- 145k daily driver - street modified differential - PARTING OUT OR SELLING SOON - PORTLAND OR. AREA - PM ME FOR DETAILS
1988 560SEL "Gunther"- 190K passes anything except a gas station
1997 S420 - 265k just bought it with a rebuilt trans. Lovely condition
Reply With Quote
  #4  
Old 10-06-2009, 10:31 PM
Registered User
 
Join Date: May 1999
Location: Sacramento, CA
Posts: 1,565
Also try the area around the belt tensioner/tensioner shock.
Reply With Quote
  #5  
Old 10-07-2009, 01:33 AM
Registered User
 
Join Date: Jul 2006
Location: Seattle, WA
Posts: 19
I have looked again today and tried to determine where the sound is coming from. Without the stethoscope - did not find one yet. Looks like it originates where the cam sprockets are. I think I'm going to take off the cylinder head cover tomorrow and see if anything there looks out of ordinary.
__________________
2002 C230K
Reply With Quote
  #6  
Old 10-07-2009, 09:13 AM
slk230red's Avatar
WECO Installer
 
Join Date: Jul 2006
Location: Tampa, FL
Posts: 820
The rattle you are describing is probably the Magnetic Cam Adjuster. You might want to pull the connector off to check for leaking oil... it's not good for oil to seep up into the harness.
__________________

1993 190E 2.3
2001 SLK230
1971 LS5 (454) Corvette Convertible
Reply With Quote
  #7  
Old 10-07-2009, 06:16 PM
Registered User
 
Join Date: Jul 2006
Location: Seattle, WA
Posts: 19
I have replaced the adjuster one year ago, along with the magnet and the chain tensioner. Seen and fixed the oil leak you mentioned, too.
The problem that I did not install it right first time when I done the replacement. The adjuster consists of several parts that slide one into each other...long story short, I did not slide them in all the way. I got lucky (or so I thought) - the only problem I've experienced was the check engine light because the magnet could not pull the adjuster core anymore. I reassembled and reinstalled everything, the light was gone, and I assumed that the incident is resolved. But maybe the adjuster experienced some premature wear because of this.. have no clue. Maybe it is not the adjuster at all.
Anyway, anything you'd suggest me to pay attention when I take the cover off? In particular I'm interested if I can (or need) to check the tension of the timing chain.
__________________
2002 C230K
Reply With Quote
  #8  
Old 10-08-2009, 02:07 AM
Registered User
 
Join Date: Jul 2006
Location: Seattle, WA
Posts: 19
Took the cover off today - found nothing (as I suspected). Timing chain fine, not stretched, guide rails fine as far as I can see, hard to say about tensioning but it looked ok to me. No signs of any damage anywhere.
After that I did some googling, and found this topic. As Will_w202 wrote, it is a common problem, apparently. I pulled the adjuster magnet plug to test - rattle is gone Now I'm thinking, should I shell out another $500 for yet another adjuster and spend half of my weekend on replacement? I guess I'll drive with the rattle for now unless it will annoy me a hell lot more.
Thanks for suggestions folks!
__________________
2002 C230K
Reply With Quote
  #9  
Old 10-09-2009, 01:33 AM
Registered User
 
Join Date: May 1999
Location: Sacramento, CA
Posts: 1,565
Hmm, now that you mention it, it turns out my engine does this too! Car seems to run fine with the rattle, anyone know what the downside is of leaving it? Worse performance? Timing chain wear?

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:55 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page