Some forums have some great pics and details on replacing the PS pump/bracket assy for the 400 series. My E420 has a leak at the return hose (small, 76MM long) between the reservoir and the pump. This is very difficult to get to. My question is, is it possible to remove the reservoir from the bracket (along with it's hose nipple) without removing the entire pump/bracket assembly? If so, it would cut the labor involved down by about 90%. Has anyone had this problem and tried to replace the small return hose this way? Norm
http://mbca.cartama.net/attachment.p...2&d=1175425727
10-20-2009, 02:53 PM
Norm levesque 
Threaded Mode
