|
|
|
|
|
#1
11-27-2001, 12:20 PM
|
|||
|
|||
W201 rear camber correction
Hi!
After I lowered my 16V with H&Rs, the rear camber became quite apparent. The insides of the tire wear quickly. As soon as my EVO II kit is finished, I'll probably lower the car a bit more. My question is what can be done to correct rear camber on a 16V? Performance Products has an eccentric bolt kit for the tie rod strut and the control arm strut. Will the adjustable control arm strut kit allow me to adjust camber? Do I need to make an eccentric bolt for the camber strut? Are my bushings worn (control arm or camber strut)? I'm thinking of replacing the rubber bushings with poly ones. Can the old rubber bushings be pressed out of the struts? Please help!!
__________________
87 190E EVO II Turbo 
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Problems With 210 Rear Camber Need Help | SSWEET55 | Mercedes-Benz Performance Paddock | 9 | 01-21-2005 07:29 AM |
| rear camber on W124 chassies, What's the deal? | per eriksson | Tech Help | 6 | 01-24-2002 11:40 AM |
| Benzmac...made rear camber adjustments for the 400E!!! | Pbalias | Tech Help | 2 | 04-03-2001 09:32 PM |
| Renn-Tech Rear camber control-arms? Luke? | MB-Estate | Mercedes-Benz Wheels & Tires | 1 | 08-04-2000 08:03 PM |
| Rear camber lowered 190 | Paul Carey | Mercedes-Benz Performance Paddock | 9 | 12-16-1999 11:30 PM |
Threaded Mode
