Hi,
The car is a '93 300CE. Can someone tell me where to find the ASR controller?
Thanks
Anziani
'93 300CE 180K
'95 E420 117K

Electronic accelerator is under the carpet & deadpan on the passenger.

The traction system computer is under hood befind the battery.

Both are involved in the ASR system.

Problems in the EA/CC/ISC computer will turn on the ASR lamp.

Problems in the traction system will cause BOTH ABS & ASR lamps to come on.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

You can check this site out if you want to make an ASR disabling switch
http://www.2phast.com/500e/default.htm

Thanks, M.B. Doc.

The problem is that NO lights come on but the car occasionally goes into limp home at low rpms (6-700) The ASR system does work. We have done all of the obvious electrical fixes. The last left is the elusive switch that is part of the accelerator pedal and we will change it out next week. As a precaution, I was going to look at the connector to the ASR controller just to make sure there is no corrosion or other problems. The ETA got a clean bill of health also.
Anziani
'93 300CE 180K
'95 E420 117K