|
|
|
#1
|
|||
|
|||
What are the torque specs for valve cover
I intend to replace the valve cover (in EPC called cylinder head cover). There are 15 screws in three types (1 srcew at the back, 3 between the spark plugs and 11 on the side ). What are the torque specs for them?
Thanks!
__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011 --------------------------------------------------------- 1989 300CE - R.I.P. Dec 29 2007 Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE |
#2
|
|||
|
|||
I assume you're talking about the M104 in the other thread. I'm not 100% certain but I think they only get tightened to 10Nm (about 7.5 to 8 Ft-lbs).
|
#3
|
|||
|
|||
Too bad , my big expensive digital torque wrench starts at 30 ft-lbs, need to find a smaller one. Yes, the engine is M104.980 from my 1990 300CE. Thanks
__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011 --------------------------------------------------------- 1989 300CE - R.I.P. Dec 29 2007 Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE |
Bookmarks |
|
|