Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 11-28-2001, 02:27 PM
Posts: n/a
Question Need help replacing door grab handles on 96 E320

Can anyone help w/info on how to install. I bought the parts but it looks like I have to remove the door assembly to be able to screw the top part on to the power seat housing or is the plastic piece behind the handle removable so I can get at the screw?
Reply With Quote
Old 11-28-2001, 02:57 PM
94 E320
Join Date: Jun 2001
Location: Fairfax, VA
Posts: 437
I know u don't have a w124 chassis but there is an article in the FYI @ this site that might shed some light.

Good luck,
Reply With Quote
Old 11-28-2001, 03:55 PM
aTOMic's Avatar
Join Date: Aug 2001
Location: Hendersonville, Tennessee, USA, Earth
Posts: 451
there are three screws holding the door panel on. You must pry the SRS badge off (I recommend using an old credit card so you don't scratch anything), one screw is behind that; one is under the trim on the door opening pull handle and I forget where the third on is but it's the easy one to find

Hint USE THE SEARCH!! our cars have a "W210" body so theat narrows the results. Here is a helpful thread...door panel removal W210
RIP "Betsy" (Oo=*=oO)
'96 E 3 2 0 (W 2 1 0) M 1 0 4

Spaces in sig so as not to screw up the SEARCH; every time someone searches for that MB they don't want my sig!

2004 Audi A8L
'98 VW Passat 1.8T 5M
'87 Alfa Romeo Milano 2.5L 5M
'67 Impala convertible, 327cid
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing all shifter bushings on W126 - p.1 rurik Diesel Discussion 22 04-13-2012 03:41 PM
Will these fit on a 95 E320 Wagone, W124 HGV Wheels & Tires 6 06-05-2002 03:36 PM
W124: 94 & 95 E420 same brakes as E320? renyf1 Performance Paddock 12 02-15-2002 02:04 PM
Replacing 1998 E320 speakers Roger Jones Car Audio and Multimedia 2 07-27-2001 11:46 PM

All times are GMT -4. The time now is 04:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page