|
|
|
#1
|
|||
|
|||
Under Hood Heat Insulation
I recently noticed the pad, which is glued to the underside of my hood to prevent heat from damaging the paint above, is dried out and starting to flake apart.
I found the replacement part online for a reasonable price, but I'd like to know: What's the easiest way to remove the old, dried out one? It's probably going to flake apart and be time consuming. And: What adhesive do I use to attach the new one? Thanks.
__________________
2003 S500 Black/Charcoal 1990 560SEL 61k Arctic White/Grey SOLD: 1988 420SEL Black/Palomino Sold @ 85k 1987 420SEL Midnight Blue/Grey 1986 420SEL Diamond Blue/Grey 1983 380SEL Champagne/Palomino |
#2
|
||||
|
||||
It's messy, but pretty easy. Old sheets over engine and front fender/grill area to "catch" debris. Tear off what you can and scrape the rest of the pad+adhesive with a dullish putty knife. Use 3M adhesive remover on remaining adhesive. Clean and dry area. Use 3M trim adhesive (they make a spray can version) and follow directions on the 3M can or tube (if you use that).
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) |
#3
|
|||
|
|||
Rich126,
Would you give me your online source for the heat insulation pad you found. My '83 300 cd is in the need of a replacement. Thanks. Marks88 |
#4
|
|||
|
|||
Check the PartsShop inventory at the top of this page. I think I saw it there last year.
[I should be buying one myself....] [but it is winter...] |
#5
|
|||
|
|||
www.************************
They'll have your model hood pad. >> 3M Glue Remover (P/N 99-012) $9.98 ea (12 oz spray can) >> 3M Super Trim Adhesive (P/N 830016) $17.50 ea (12 oz spray can) Hope this helps. Brian16V |
#6
|
|||
|
|||
I would suggest that you give your business to the guys above; after all they maintain this site which is so helpful to al of us. A humble suggestion...
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
111 chassis hood insulation pad | Gregg Bambo Jr. | Vintage Mercedes Forum | 1 | 07-02-2004 06:49 PM |
does anyone have insulation under ther hood | phillip | ML, GL, G-Wagen, R-Class, Unimog, Sprinter | 2 | 11-15-2003 11:39 PM |
Which hood pad? w/ or w/o heat shield? | burnan | Diesel Discussion | 9 | 01-16-2002 03:13 AM |
'85 300SD hood insulation - needed? | Jim H | Diesel Discussion | 12 | 09-16-2000 12:11 PM |
Hood heat shield lining | kombmh | Tech Help | 7 | 05-24-1999 09:36 PM |