Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-08-2010, 02:46 AM
Registered User
 
Join Date: May 2010
Posts: 25
300e 2.8, No voltage to the o2 sensor heater

I'm not getting 12 volts to the o2 sensor heater. Looking at the wiring diagram, it looks like the V+ wire goes directly from the sensor heater to pin 30 of the ECM. Does anyone know if there is a relay and/or fuse in this heater circuit?
Reply With Quote
  #2  
Old 07-08-2010, 09:19 AM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
No relay or fuse on that model.

Directly from HFM control unit.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #3  
Old 07-08-2010, 01:12 PM
Registered User
 
Join Date: May 2010
Posts: 25
Quote:
Originally Posted by M.B.DOC View Post
No relay or fuse on that model.

Directly from HFM control unit.
That's what I was afraid of. Do you know if there is an operating condition or external signal the hfm unit is looking for that would tell it to shut off that voltage or am i going to be opening up the unit to look for an internal fault if i find no fault in the wiring from the unit?
Reply With Quote
  #4  
Old 07-08-2010, 01:38 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Signal should happen at approx 35C engine coolant temp.

Heater runs all of the time from there.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #5  
Old 07-08-2010, 04:12 PM
Registered User
 
Join Date: May 2010
Posts: 25
Quote:
Originally Posted by M.B.DOC View Post
Signal should happen at approx 35C engine coolant temp.

Heater runs all of the time from there.
I assume that's determined(35C) by B11/3?..Any resistance/temperature reference charts available for B11/3 to test it for function?
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:59 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page