Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-11-2010, 12:36 PM
Registered User
 
Join Date: Jul 2009
Posts: 30
Power window part?

The part pictured below broke (please click on the link). It connects the window to the regulator cable on the rear driver side door. Can I order just this part or do I have to buy the whole power window reguator?
Thanks,
John


Last edited by johncibulsky; 07-11-2010 at 01:57 PM.
Reply With Quote
  #2  
Old 07-11-2010, 12:38 PM
Registered User
 
Join Date: Oct 2005
Posts: 4,263
That link seems to go to your email service or something similar. It requires a login and password, which I'm sure that you shouldn't be giving out here.
Reply With Quote
  #3  
Old 07-11-2010, 02:05 PM
Registered User
 
Join Date: Jul 2009
Posts: 30
Power window part?

Thanks for the heads-up, Matt.
Try this attachment.
Attached Thumbnails
Power window part?-powerwindow.aspx.jpg  
Reply With Quote
  #4  
Old 07-11-2010, 02:24 PM
Registered User
 
Join Date: Oct 2005
Posts: 4,263
What car does this fit?

I don't know if that part is available. I fixed one on my 210.
Reply With Quote
  #5  
Old 07-11-2010, 02:25 PM
Registered User
 
Join Date: Jul 2009
Posts: 30
Power window part?

1995 E300D sedan
Reply With Quote
  #6  
Old 07-11-2010, 02:32 PM
Registered User
 
Join Date: Oct 2005
Posts: 4,263
Well, Fastlane lists a "guide jaw" for the rear regulator, but the picture in the catalog looks not like yours.

I would suggest giving them a call, or pm whunter with the URL for this thread.
Reply With Quote
  #7  
Old 07-11-2010, 02:33 PM
Registered User
 
Join Date: Jul 2009
Posts: 30
Power window part?

Thanks for your help.
Reply With Quote
  #8  
Old 07-13-2010, 04:37 AM
pifcat2's Avatar
Registered User
 
Join Date: Jun 2003
Location: Willow Glen
Posts: 299
I believe that's from a rear window regulator. I have not seen the broken part on the right available separately but the plastic part on the bottom can be purchased at **********. It has a pin that must be pressed flat.

I had the pivot part on the right break as well and had to replace the complete assembly. You can reuse the motor but need to install the wire correctly.
__________________
'88 300TE, 175k, black RENNTech 3.6L Recaro C's AMG 1
'92 500E, 110k, Spruce green, stock
'94 E320 Cabriolet, 130k, E500 wheels, Emerald green
'94 E320 Cabriolet, 110k, black, stock, for sale
'88 300TE, 229k, dark grey, for sale
'90 300CE, 212k, white, new paint, for sale
'91 300E, 209k, white, rebuilt head
'74 914-6, grey, 2.7L 325hp twin turbo Audi conversion
Reply With Quote
  #9  
Old 07-15-2010, 11:35 PM
Registered User
 
Join Date: Jul 2009
Posts: 30
Power window part?

I took out the regulator and removed the rest of the broken part. The entire part, broken in two pieces, is pictured below (both front and back are pictured). Does anyone know where I can get one of these? All the websites seem to have the wrong part listed as the replacement for it.
Thanks,
John
Attached Thumbnails
Power window part?-guide-jaw-back.aspx.jpg   Power window part?-guide-jaw.aspx.jpg  
Reply With Quote
  #10  
Old 07-16-2010, 08:50 AM
Registered User
 
Join Date: Oct 2005
Posts: 4,263
Have you called Roy yet?
Reply With Quote
  #11  
Old 07-16-2010, 12:27 PM
Registered User
 
Join Date: Jun 1999
Location: Albuquerque, NM USA
Posts: 1,946
Quote:
Originally Posted by johncibulsky View Post
I took out the regulator and removed the rest of the broken part. The entire part, broken in two pieces, is pictured below (both front and back are pictured). Does anyone know where I can get one of these? All the websites seem to have the wrong part listed as the replacement for it.
Thanks,
John
Why don't you subscribe and look at the illustrated parts breakdowns provided by Mercedes EPC?

You've had 5 replies and it's been 5 days and you still have no answer. And, you can find out definitively for yourself and learn a new resource at the same time. Don't hold out any hope for "aftermarket."

http://epc.startekinfo.com
__________________
Kent Christensen
Albuquerque
'07 GL320CDI, '06 SLK350
Reply With Quote
  #12  
Old 07-20-2010, 12:54 PM
Registered User
 
Join Date: Jul 2009
Posts: 30
Power Window Part?

Thanks Guys,
I spoke with someone at Peachparts, but we couldn't find a guide jaw that looked like my part. I just subscribed to Mercedes EPC, so hopefully I can find the part there.
John
PS- Sorry for the delayed response, I was on vacation and couldn't get to a computer.
Reply With Quote
  #13  
Old 07-20-2010, 07:41 PM
Registered User
 
Join Date: Oct 2005
Posts: 4,263
No problem with the delay. But please keep us posted on what you find. You're not the only person who would like one of these.

I was able to repair mine, but that's certainly not going to always be the case.
Reply With Quote
  #14  
Old 07-20-2010, 10:44 PM
Registered User
 
Join Date: Jul 2005
Location: Seattle, WA
Posts: 584
my experience has been the same as Matt L...ie on a 210. so I dont know if
this is applicable for your model. it sure comes darn close.

for the 210, I know, there is no known a la carte replacement. as close as
you can get is an assembled part for something else. then separate them by
drilling out the large pin. go to your broken part....and drill to separate. now
swap out the damaged part with new and rivet together.

the part costs about $10. the labor is about an hour. depending on the time I
have, I may simply opt to replace the whole regulator arm for <$50.



as i understand, in your situation, it's the gray part...the one in which both ends
of the cable are secured, right?
__________________
-- raymond~
47 34'N 122 18'W
Reply With Quote
  #15  
Old 07-22-2010, 01:29 PM
Registered User
 
Join Date: Jul 2009
Posts: 30
Power Window Part?

Thanks Raymond,
I've never installed a rivet before. I have the exact pieces (original & replacement) pictured in your diagram, but I've never worked with rivets before. Once I drill out the existing rivet, what kind of rivet would I use to replace it? I spoke with one body shop that was very helpful but the guy told me that it couldn't be done because it was a "special rivet." Bear in mind that I don't need the repair to be 100% perfect as I could save anywhere from $130 to $300 if I don't have to buy a used or new window regulator.
John

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 10:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page