Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 09-25-2010, 12:13 PM
Registered User
 
Join Date: May 2009
Location: Nashville, TN
Posts: 57
wagon in the limp home mode?

My E320 95 is in limp home mode! I pulled the codes and get

Pin 8 - code 11 O2S1 heater...
and code 45 - Fuel safety shut-off to engine control module (HFM-SFI or left or right LH-SFI)

Pin 14
11 Closed throttle recognition signal to engine control module (HFM-SFI or Left LH-SFI)

The wiring harness has been replaced as well as the OVP relay.

Here is what I read in the manual...

If the throttle valve is opened further than specified by the accelerator pedal because of malfunction and the Tempomat cruise control is not in use, a safety contact in the actuator switches a ground signal to the LH control unit via the electronic accelerator pedal control unit. This interrupts fuel injection, which is restored again at a certain engine speed depending on the engine!

Does this mean my ETA is SHOT? I replace it 5 years ago with a new one!

Cheers,

Franz

Last edited by baudenfj; 09-25-2010 at 10:06 PM.
Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page