|
|
|
|
|
#1
10-31-2010, 05:27 AM
|
||||
|
||||
|
I guess I asked the wrong question
so now that I know my check engine light is on because of my air something.....I get 11 flashes. so knowing what the problem is.....how do I fix it?
__________________
 1990 190E 3.0L 
|
|
#3
10-31-2010, 12:39 PM
|
|||
|
|||
|
Your signature says 1990 190E.
Is this a 2.3 or 2.6? CA version or federal version?
__________________
Paul S. 2001 E430, Bourdeaux Red, Oyster interior. 79,200 miles. 1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
|
|
#4
10-31-2010, 01:56 PM
|
||||
|
||||
|
its a 2.6 ca version.
__________________
1990 190E 3.0L
|
|
#5
11-01-2010, 01:08 AM
|
||||
|
||||
ok so this is the part I replaced a few weeks ago after I disconnected the vacuum hose and didn't feel any suction
 . good news is that today I noticed that my check engine light was off and I didn't even reset it.however, on the part in the pic there is a small nozzle and the vacuum tube was on, but not pushed flush against the base so I'm hoping my issue is resolved. the light hasn't come back on all day so I will keep u all posted.
__________________
1990 190E 3.0L
|
 |
| Bookmarks |
|
|
Linear Mode
