|
|
|
#1
|
||||
|
||||
M103 Oil Sender Bolt Torque Values
Today I did an oil & filter change and while the pan was drained I replaced the two oil sender gaskets as my sender was weeping a bit.
Does anyone know what the torque values are for the two 10mm bolts for the oil sender? Drain plug is 30 Nm I believe...
__________________
2006 BMW M5 "Heidi" @ 109,000 miles 2005 MBZ C55 AMG "Lorelai" @ 165,000 miles 1991 MBZ 300E "Benzachino II" @ 165,000 miles 1990 MBZ 500SL "Shoshanna" @ 118,000 miles (On the hunt for a good used M103 engine as of 6/10/23, PM me if you have one to sell!) |
#2
|
|||
|
|||
Oil level sensor?? 10Nm
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
I believe you are correct, thank you.
__________________
2006 BMW M5 "Heidi" @ 109,000 miles 2005 MBZ C55 AMG "Lorelai" @ 165,000 miles 1991 MBZ 300E "Benzachino II" @ 165,000 miles 1990 MBZ 500SL "Shoshanna" @ 118,000 miles (On the hunt for a good used M103 engine as of 6/10/23, PM me if you have one to sell!) |
Bookmarks |
|
|