Setting crankshaft to ignition TDC (\'91 103)

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
Setting crankshaft to ignition TDC ('91 103)

01-02-2002, 06:59 PM

pmizell

Benz Zealot

Join Date: Jun 2001

Location: Houston, Texas

Posts: 838

Setting crankshaft to ignition TDC ('91 103)

In the process of removing head, the shop manual ('86 year, 103 engine) says to set crankshaft to ignition TDC and shows a picture with a numbered cylindrical setting dealy

Either I'm blind or they changed the later 103's to set to TDC some other way, because I can't find this setting anywhere.

If it's not been changed on any 103's, then where should I be looking for this area? It could be that oil is covering the spool but I don't think that's the case.

TIA

~Paul

_________________
'91 300E, 206k miles

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TDC on 103 engine	jylee	Tech Help	5	11-25-2004 09:42 PM
Finding initial crankshaft TDC on '79 SL	sjett	Mercedes-Benz SL Discussion Forum	1	09-06-2004 09:32 AM
TDC sensor setting	chris-edinburgh	Tech Help	1	02-09-2004 06:32 PM
103 ignition timing	Duke2.6	Tech Help	6	05-14-2003 03:06 PM
Setting TDC After Rebuild M103	Maddog	Mercedes-Benz Performance Paddock	0	02-03-2003 09:26 PM

All times are GMT -4. The time now is 12:39 PM.