|
|
|
#1
|
|||
|
|||
Help 92 400E wiring harness source
Does anybody have a good (inexpensive) source for a 92 400E wiring harness? The stealer is quoting $1100 CAD... a good previously enjoyed one would work for me...
Thanks, Nick
__________________
Almost mint 1983 230E eurospec. Honda civic for those not so mint moments. |
#2
|
||||
|
||||
Are you good with wires and solder? No way in hell I would pay that much for a harness, I would rebuild the one I had. But messing with harnesses is part of my job.
Goodluck.. I think they where $700ish in the US the last time I looked.
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D |
#3
|
|||
|
|||
The Mercedes EPC shows the part number as 1245438832, up to the end of model year 1992. Have you considered sending a request to Fastlane or AllPartsExpress (above, under Buy Parts) to see if they can quote you a price on it?
__________________
1993 400E, 256,000 miles (totaled) 1994 E420, 200,000+ miles 1995 E420, 201,000 miles |
#4
|
|||
|
|||
Thanks guys, I have already sent in the parts request to fastlane/allparts... I might end up rewiring it myself. The only catch seems to be that you have to cut open the original connectors without damaging them too much.
__________________
Almost mint 1983 230E eurospec. Honda civic for those not so mint moments. |
#5
|
|||
|
|||
There's no need to cut open any connectors. You might have some small ones crumble on you but they can be replaced for a few bucks each. But a new one is only $480 ($490 Can.) in the U.S. - not sure if they ship to Canada.
|
#6
|
||||
|
||||
search the web u can find them from 400-600 dollars
|
#7
|
|||
|
|||
Thanks for all the input. Decided to rebuild the harness, 4 Wires done 30 to go... Does anybody know how to open the round throttle body connector?
__________________
Almost mint 1983 230E eurospec. Honda civic for those not so mint moments. |
#8
|
|||
|
|||
please do photograph/ document as you progress ,it will be very useful to other forum members with a similar problem.regards
mak
__________________
mark |
#9
|
|||
|
|||
rear low pressure hose off the rear pump is a cake walk to replace... compared to the one between the cooler and line along the - can I call it a frame rail?
The inlet and outlet on that hose are different sizes.. It's a custom molded dealer item kinda "s-shaped"- about $20-30. Michael |
Bookmarks |
|
|