can some one tell me how to remove the ignition wiring harness in a 1991 MB 300D w124 2.5 turbo diesel car??? please if you can!!! i have all of the dash opened from under the steering wheel all i need is the harness not the switch or the tumbler i need to get to and tap the wires for a remote start module if i can
thank you
denis

Might want to post this over in The diesel Section too,

__________________
hum.....
1987 300TD 311,000M Stolen. Presumed destroyed

With the key turned to position 1 (radio) the electrical connector just slides off of the switch.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

There is a three wire plug in the left of your engine room, just front of the brake fluid box. The middle wire is the control current for the starting motor.

__________________
600SEL '91
300E 4Matic '88
240D '83
280SE '77
350SE '73
The most complex systems can fail in the simplest way.
Contra verbosus noli contendere verbis, sermo datur cunctis, animi sapientia paucis.

i don't believe in the lord! He's never bought me a Mercedes Benz.