Hi, Yes, this is Peachy!
I was gonna post it over on the original thread but figured I would get better info by posting a specific question.
Its not a "Gears Grinding" kinda noise, its a low grumble, and only lasts a split second.
It sounds like a transmission slip, kinda.
I was wondering/hoping someone could help ID it.
When I seach all the results say K1... so I did that, and it didnt cure it!

__________________
2009 Mercedes ML320 Bluetec

sure you got the k1 kit?..... did you compress the spring to fit the plastic?

is it installed in the correct place?

sorry to be redundant, but.....

__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]

Not a prob Lee!

Yes, I am pretty sure I did it right.
Here is what I got...


Here is a pic of the inside of the trans... pretty clean..
The spring kit went into the front of the transmission... top LH in the pic below..

__________________
2009 Mercedes ML320 Bluetec

right location, right part....

doesn't really take any effort to pull it again and examine the spring and plastic.....

otherwise i would be stumped

__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]