|
|
|
#1
|
|||
|
|||
Why 36 hours labor time for OM603 head replacement
Awhile back, I made a few posts telling of my horror story when getting my 300SDL running as designed.
To make a long story short, the dealer's diagnosis (after incorrectly diagnosing the first time) was that I had a cracked head. They also advised to replace the valves since there was over 200k miles on the car. I was told 32 to 36 hours labor was the factory book's allocation. Of course, I was billed for 36 hrs if I recall correctly (Labor was ~$3000). Total job with parts and labor was like $5200. I was talking with an old friend today as we were doing some car-related odds and ends. We were discussing how MB tends to engineer things so they are fixable rather than disposable. Anyway, I mentioned the cracked head problem and told him what it had cost. We got to discussing this and realized the 36 hrs seemed like a very long time to remove the old head, transfer the parts, and reinstall. 36 hrs is almost an entire work week. So why would it take sooo long? What makes an MB engine so much different than say a VW TDI engine or a PowerStroke? Or did I just get ripped off? Not that I'm complaining about spending the money. I like the car so much, it was worth putting some into it. Even though the car itself isn't worth much more than the repair.
__________________
Lance Allison Lance@LanceAllison.com Current: 11 MB S550 4Matic, 55k miles, Designo Black/Black 14 Ford F150 XLT Lariat Crew, 73k miles, 5.0 Coyote V8 4x4. Black/tan. 09 GMC Envoy Denali, 5.3 V8, 4x4 SWB. 38k miles, Jewel Red/Med Gray. Gone: 87 MB 300SDL, 320k miles, Astral Silver/Blue. 98 VW Jetta TDI, 488k miles, Classic Green/Gray. 85 Olds 98 Brougham FWD, 4.3 DIESEL V6, 80k miles, 3x Gray. MBCA Member, Chicago Region |
#2
|
|||
|
|||
I can check the Alldata labor rates when I get back to work Monday but in my past experiences the most I've gotten paid for that job was 16 hours.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
95 SL 500 Head Light Bulb Replacement | beerme | Tech Help | 1 | 11-24-2004 11:20 PM |
380SEL replace 6 bent valves or used head? | New2MBZ | Tech Help | 0 | 07-30-2003 01:17 PM |
Cost Estimate for 300SDL Head Gasket Replacement | Mark Herzig | Tech Help | 6 | 02-07-2000 07:41 PM |
Head Gasket Replacement | Bizron | Tech Help | 1 | 10-18-1999 08:46 PM |
1986 300E head rebuild/cam replacement | joebeetle | Tech Help | 5 | 08-31-1999 09:39 PM |