|
|
|
|
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
How do I replace a fuel pressure accumulator on a 1981 380 SLC??
How do I replace a fuel pressure accumulator on a 1981 380 SLC?? Where is it located and on a scale of 1-10 how hard is it to replace. Thanks so much
-Aaron |
#2
|
||||
|
||||
It should be between the rear axle and the fuel tank. It's fairly easy to do. I wouldn't attempt it without a shop manual... that would have told you where it is MB shop manuals are preferred but a Haynes manual covering the 450SL/C models should be a reasonable guide for your car.
A decent manual will provide the necessary precautions for working on the pressurized fuel system, and it's pressurized even with the engine off even with a bad accumulator. Don't forget to replace the crush washers on the banjo fittings. Sixto 91 300SE 81 300SD |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
M103 Fuel Pressure Regulator - Report | Michael Stoic | Tech Help | 6 | 05-27-2004 12:49 PM |
1980 380 se is what is on the title, fuel issues | frankford | Tech Help | 0 | 12-03-2003 07:48 PM |
Manually adjusting fuel pressure in a 300E?? | mike690003 | Tech Help | 14 | 11-22-2003 07:33 PM |
Changing Fuel Pressure Regulator, M103 (Need Advice) | Michael Stoic | Tech Help | 1 | 11-06-2003 12:07 PM |
1982 380SL fuel problem | Benzene | Tech Help | 5 | 06-12-2001 10:47 AM |