I've spent an hour on EPC trying to find the "Seat Belt Lock" (Female device that the male seat belt mates to.) EPC shows a picture but doesn't give a part number. Anyone?
Anziani

What model and year car?

__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket

Tesla Model 3. 205,000 miles. Been to 48 states!
Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels.
2014 Cadillac ELR
2013 Fiat 500E.

I'm sorry. It is a '93 300CE (I wasn't awake yet)
VIN WDBEA52E6PB958520

Anziani
'93 300CE 200K
'95 E420 122K

If its the female latch with red release button at the rear inward side of each front seat AND if its the same as used on a sedan then I have them (88 300TE or 95 E320). $12/each, $20/pair plus UPS.

__________________
Hanno
'79 6.9 Sold (after 27 years)
'83 280SL, 5 spd.
'94 E320 Sdn. 5 spd conversion
'02 E320 Sdn.(on loan to mom!)
'87 300E (5 spd. conversion) Sold
'05 E500 Wagon

Thanks, but the CE must have a special one. It is tied into the "belt presenter" and retracts the presenter when the lock is engaged. The EPC drawing shows a wire connector coming out that plugs into a mating connector to complete the circuit.
Anziani
'93 300CE
'95 E420

Appreciate your checking, at least I know what it doesn't fit. Its electrical switch will turn off the buzzer when engaged. Its the same as the one in your E420. If you find (long shot) that its the same switch that handles more than one purpose let me know.

__________________
Hanno
'79 6.9 Sold (after 27 years)
'83 280SL, 5 spd.
'94 E320 Sdn. 5 spd conversion
'02 E320 Sdn.(on loan to mom!)
'87 300E (5 spd. conversion) Sold
'05 E500 Wagon

Hanno,
Do you see a part number on your seat belt lock (drivers side)? And does it have a cable exiting with two connectors? You might be right. One size fits all. Let me know.
Thanks,
Anziani