1987 W124 260E: Pulling the instrument cluster - Page 2 - PeachParts Mercedes-Benz Forum

throne7 · #16 12-07-2011, 01:46 AM

Quote:

Originally Posted by throne7

I am going to see if I can remove the two vents adjacent to the IC. I got the left one out now, how do I get the one on the right off? It seems to have only one set of clip (on the far left), I don't see any clip on the right.

Some photos for souvenirs...

By the way, what is the name of the bulb that is inside the vent? Are there LED replacements available for this type of bulb? Thanks!

berryrice · #17 12-07-2011, 07:17 PM

hello Throne7,

I have a 95 w124 wagon and I didn't have to remove either right/left vent. I just fashioned two 8" steel coat hanger rods bent a small "u" shaped hook with some needle noise pliers. I thought it would mar or scratch the soft material around the cluster but it didn't...if your carefull. Just take the two hooks (you can actually buy nice official ones too) and slide them to the right and left of the cluster and rotate them until they catch the lip of the cluster.....then pull somewhat hard and steady with a rocking left to right and it should release. Almost feels glued or suctioned cupped in the first time....hope this helps.