![]() |
|
|
|
#1
|
|||
|
|||
W124 Keyless Entry Help
Hey guys,
I bought my mom a keyless entry system for her E320 station wagon for christmas. I have it all installed and it works really well, but I have three wires I need to find. 1. Front Parking Light wire 2. Rear Parking Light wire 3. Trunk release wire I know that the two parking light wires are located on the turn signal stalk, but is there an easier location that is near the rear bench/vacuum pump to tap in to? Also what color is the trunk release wire, where is it located, and where could I tap in to it? Is running a wire to the actual mechanism the only way to wire this? Thanks! |
#2
|
|||
|
|||
Try this site. It has all the wiring and location for almost all cars. Good luck.
1986-93 Mercedes 300 Series Alarm, Remote Starter, Keyless Entry Wiring Information
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. ![]() W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
#3
|
|||
|
|||
^Looks like light switch is the only answer. Oh well, shouldn't be too hard of a job.
This is the kit I ordered and I am more than pleased. The instructions are chassis specific which is great, but they lack direction when it comes to telling you where the wires are. |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|