|
|
|
|
|
#1
01-23-2011, 10:11 PM
|
||||
|
||||
|
HELP - Loud Squeak- 300E
I've never heard a squeak like this.
1993 300E - Coming from the front drivers side Shock (tower) is a loud squeak noise . I get it when I turn the wheels either direction (L or R ) . Just started 2-3days ago. First I thought power steering (fluid ) issue.. Fluids are ok level. So I have my son turn the wheel while I'm looking under the front wheel and this is w/o doubt coming from the shock . This sounds loud like a loud rusty gate ...It also happens when I push down on the front fender ... I'm guessing time for new shocks up front but does anyone have a more precise idea what this is . My Benz sounds like a 40 yr old pickup truck that's been sitting for 30 yrs in the rain!! AA......
__________________
'87 924S '81 280SEL Sold -> 81 300SD - 93 300E w/ 3.2 85 300D- 79 300SD 82 300CD 83 300CD - CA 87 190E 5 spd 87 Porsche 924S "..I'll take a simple "C" to "G" and feel brand new about it..." 
|
|
#2
01-23-2011, 10:50 PM
|
||||
|
||||
|
Well if you're sure the noise is coming from the strut area, it may well be time to replace the struts and mounts. However, often squeaks on turning the steering wheel side to side are the result of bad ball joints.
__________________
1988 California version 260E (W124) Anthracite Grey/Palomino Owned since new and still going strong and smooth MBCA member Past Mercedes-Benz: 1986 190E Baby Benz 1967 230 Inherited from mom when she downsized 1959 220S Introduced me to the joys of keepin' 'em goin' There are only 10 kinds of people in the world--those who understand binary and those who don't
|
|
#3
01-23-2011, 11:51 PM
|
||||
|
||||
|
Cal..it really sounds like it's coming from the shock .
above the ball joint I dont think there is an upper ball joint and if there was it would still be coming from the middle of the two.... ..
__________________
'87 924S '81 280SEL Sold -> 81 300SD - 93 300E w/ 3.2 85 300D- 79 300SD 82 300CD 83 300CD - CA 87 190E 5 spd 87 Porsche 924S "..I'll take a simple "C" to "G" and feel brand new about it..."
|
|
#4
01-24-2011, 12:24 AM
|
||||
|
||||
|
I would vote for ball joint, since i did that very job this weekend. I had to put my ear right on the lower ball joint to be sure where it was coming from and still it was a bit difficult to figure out...
My squeak was prominent 90-95% when turning the wheel left or right and i would get a squeak by pushing down on the bumper. It was so loud people would look at me in the parking lots! I am now just waiting for delivery of a proper bolt and nut for the pinch clamp to get me back on the road.
|
|
#5
01-24-2011, 04:00 PM
|
||||
|
||||
|
Ball Joint.
An immediate albeit temporary "fix" is to punch a small hole into the boot and spray in some Wirth/Wurth(?) or similar lubricant like lithium grease.
__________________
2008 E350 4matic / Black/Anthracite ------------------------------------ Gone but not Forgotten: 2001 E430 4matic, 206,xxx miles, Black/Charcoal 1995 E320, 252,xxx miles, Black/Grey 1989 260E, 223,00 miles, Black/Black Last edited by EricSilver; 01-25-2011 at 02:42 PM.
|
|
#6
01-25-2011, 06:36 AM
|
|||
|
|||
|
sounds more like a ball joint to me...
a liberal spray of lithium grease my help you isolate it or temporarily eliminate it...
__________________
1989 300ce 129k ( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone) 1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus 1994 e320 Cabriolet 108k  1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it [/SIGPIC]
|
|
#7
12-28-2011, 09:25 PM
|
|||
|
|||
|
Ditto...
I to have the ole squeaks in the drivers corner. I read the posts and tried something along those lines with a twist..I used an awl to poke the hole in the joint boot then filled my chainsaw oiler,(you know? That little plunger tool for oiling the bar tip wheel...) Filled it with a good lube, inserted it into the hole, pumped till it puffed oh so slightly, turned the wheels several times back n forth and taa daa. Believe it or not it worked. I am squeak free and loving it. Oh happy day...
|
|
#8
12-29-2011, 04:24 AM
|
||||
|
||||
|
same thing with me....except my boot is ripped so I'm using hi temp grease
__________________
 1990 190E 3.0L
|
 |
| Bookmarks |
|
|
Linear Mode
