I just bought my second M104 in an E320 wagon and as happy as I am to own a wagon (family of 7 in a few months so this keeps me driving a reliable old MB which I'm very happy about), I'm a little nervous that it will become a money pit.

Plug in the MAF sensor and it'll stumble, try to idle and kill. I happened to unplug the MAF and it actually runs! Enough to get me a 3 hours drive home thank God. I realize that this is called Limp mode (owned an E320 a few years ago). But anything else this means? I cleaned the MAF sensor with spray MAF cleaner and no change. I'm guessing that there could be other problems. Also the harness is original (looked and see a 1993 date). Not sure if the PO's mechanic changed the O2 sensor(s??). I checked the fuse on the OVP relay and it tested good. Haven't checked the relay itself. No CEL but the bulb may be gone who knows. Haven't had the chance to pull codes (have the Arthur Dalton code reader I built years back). I'm sure it'll give a MAF code since I drove with it unplugged. It doesn't feel like it's got an ignition/spark issue. Not really missing, just kills if the MAF is plugged in and definitely doesn't do low speeds well without stumbling and killing. But it halfway runs without the MAF plugged in. Just a low idle and surging if in park (limp mode). But much better than when I plug the MAF back in.

Thanks for any tips!!

__________________
-E300d '99 350k
-Suburban '93 220k
-TDI Jetta '03 350k
Sold
-F250 '96 7.3
-Dodge Ram 12V
-E320 '95 200k
-E320 Wagon 1994 155k
-300d Turbo '87 187k miles
-E320 1994 200k
-300d Turbo '84 245k (sold to Dan62)
-300d Turbo '84 180k
-300sd '80 300k
-7.3 Powerstroke Diesel 15P Van 500k+ miles
-190d '89 Non Turbo 2.5 5cyl 240k (my first MB)
Tom's Imports of Columbia MO Ruined the IP in changing leaky delivery valve O-Rings - Refused to stand behind his work. Mid-MO MB drivers-AVOID Tom's.