Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 02-10-2002, 01:38 PM
Posts: n/a
Second-to-First downshift "thump" fixed...

There have been a few posts about a noticeable bump occurring just in the last few feet of deceleration as the car shifts down.

My '97 S320 had this but in the course of a routine service they have replaced the flex-disc coupling at the front end of the driveshaft and the problem has gone away. It was relatively cheap....
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
126 trans won't downshift 126nut Tech Help 3 07-27-2004 07:55 PM
83 240D I can't downshift from 4 to 3, however I can shift from 3 to 4 Carrameow Diesel Discussion 5 09-24-2003 10:30 AM
83 240D I can't downshift from 4 to 3, however I can shift from 3 to 4 Carrameow Tech Help 0 09-22-2003 05:14 PM
Does Your 300 Turbo downshift on grades? can-do Diesel Discussion 7 03-21-2002 02:35 AM

All times are GMT -4. The time now is 10:10 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page