|
|
|
#1
|
||||
|
||||
four pin temp sensor to EZL
OK gang did more testing an have a question concerning the 4 pin water sensor that goes to the EZL. I looked at the female plug end and got the numbers to apply these values to. upper left pin1 to lower right pin 4 gave me a 2.721 reading then pin 2 lower left to pin 3 upper right, gave me a 2.665 ohms reading. I had no readings 1 to 3 or 1 to 2 no reading pin 3 to 4 nor 3 to 1 and no readings to base of unit from any pin dose this seam OK ?
did the pin number asignement wrong pin 1&3= 2.466 pin 2&4= 2.044 Last edited by just-n-time; 04-09-2012 at 04:10 PM. |
#2
|
||||
|
||||
As far as I know, that just a double temperature sensor with pins 1,3 on one sensor and pins 2,4 on the other. Their values should be fairly close to each other, which they seem to be in your case
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#3
|
|||
|
|||
Those readings should be with-in 5% of each other & that should be 2.466K ohms
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|