|
|
|
#1
|
||||
|
||||
W126 First/Second Gen Fender Differences
Hello everyone,
My 82 300SD needs a new fender. Its got a dent at the top that needs painted, rust on the top molding mounting that goes up into the body line and metal missing at the bottom where it bolts to the chassis. My friend has second gen fenders he bought for his 300SE, however he never used them. I looked it up in the EPC and they're not the same part numbers, I was wondering what was different about them so that I cannot use them?
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#2
|
||||
|
||||
I know gen2 fenders have a VIN tag on them. Beyond that I have no clue :S
-J
__________________
1991 350SDL. 230,000 miles (new motor @ 150,000). Blown head gasket Tesla Model 3. 205,000 miles. Been to 48 states! Past: A fleet of VW TDIs.... including a V10,a Dieselgate Passat, and 2 ECOdiesels. 2014 Cadillac ELR 2013 Fiat 500E. |
#3
|
||||
|
||||
I've owned several early and late W126s.
I don't think there is any basic difference. The trim is different, which COULD require different mounting holes. If so, then the fenders would have different part numbers. Jim
__________________
14 E250 BlueTEC black. 45k miles 95 E320 Cabriolet Emerald green 66k miles 94 E320 Cabriolet Emerald green 152k miles 85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles |
#4
|
||||
|
||||
Hmmm I was thinking cladding holes/positions but I'm not sure. I'll have to grab one off him and test fit it.
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#5
|
||||
|
||||
I put a 2nd generation fender on my 1st generation car as a replacement with no noticeable difference.
__________________
http://i284.photobucket.com/albums/l...aman/Fleet.jpg Peach Parts W124.128 User Group. 80 280SL 85 300SD 87 300TD 92 300D 2.5 Turbo 92 300TE 4Matic |
#6
|
||||
|
||||
Alrighty, I fitted up the fender. Took some doing to get it to fully seat.
The only issue I have is the hood-fender gap. When I reseated my old fender (long time ago) I had this same issue with the gap too, so I dont believe it to be something with the fender. Here's some pictures: The hood-fender gap:
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#7
|
||||
|
||||
Hm there must be some trickery and witchcraft to get these fenders on and set the proper gaps.
I thought by tightening down the bolts on the top of it, the gap would normalize, but it seems to be out more in the front. The rear seems OK. It also seems to be sitting too far forward as well. Interestingly enough, the first gen part number 126 881 13 01 doesnt show up on XXXX
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#8
|
||||
|
||||
I need front fenders. But I know the day I get some is also the day my whole car needs a repaint
__________________
1991 560 SEL / 185k miles 1992 750il / 17k miles - project car |
Bookmarks |
|
|