Quote:
Originally Posted by JamesDean
To gain access to the capacitors you must desolder the speedo from the circuit board. There are a few connections to desolder, these are indicated below in the picture:
After you've finished soldering, just re-assembled everything back as it was. Be sure to re-solder the contacts for the speedo unit to the circuit board and you're all set.
|
Hi,
I was looking for the picture with the solder points, but unfortauntely, I can't find it. It looks like I can't even access the gears without unsoldering. However, I don't know which connections I would have to unsolder.
Thanks for any help!
steh-fan
11-08-2013, 03:17 AM
Threaded Mode
