|
|
|
#1
|
|||
|
|||
603 Head Removal Problem
Having a problem with final removal of head. Seems to be stuck by the chain tensioner area. Please help!!!
Have removed all 26 head bolts and 2 allen screws forward of cam gear and all attachments from turbo. When I lift head off, it is "stuck" in the front at the chain tensioner area. This is my first time doing a head job so any advice would really be appreciated. Thanks! |
#2
|
||||
|
||||
Been awhile since I removed an OM603 head, but I recall the same problem, and "found" yet another headbolt that I had missed previously.
I think there was oil on the top of it and the bolt may have been in a slightly recessed location, making it difficult to spot. Jim
__________________
14 E250 BlueTEC black. 45k miles 95 E320 Cabriolet Emerald green 66k miles 94 E320 Cabriolet Emerald green 152k miles 85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles |
#3
|
||||
|
||||
You removed the ones under the camshaft also? I had forgotten those once and felt like quite the fool...
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
Bookmarks |
|
|