I have 60 psi at fuel rail but no fuel to cylinder. I've been told that I have two fuel pumps but only found the one external pump. The car runs with forced fuel through breather. Can anyone recommend the best route of diagnosis. I'm thinking fuel pressure regulator then crank position sensor. I pulled code P1235 but scanner recognized the car as a ford, then Mazda and then a Lexus??? All three attempts pulled the same code and suggests fuel system problems

Since you have 60psi at the rail...you do NOT have a fuel pump issue!

P1 235 is a supercharger flap actuator problem. Will NOT cause a starting problem.

Do you have power to the wire going to each injector with the key on?

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator