|
|
|
#1
|
||||
|
||||
Testing parts(ECU) & (IAT SENSOR)
I need help on the procidure for testing those two units can any one help? 1991 190E 2.6
|
#2
|
||||
|
||||
The FSM will have you need.
Look here Untitled Document Testing CIS System: http://www.startekinfo.com/StarTek/outside/11832/Resources/201Create/PDF/50006.pdf
__________________
Cruise Control not working? Send me PM or email (jamesdean59@gmail.com). I might be able to help out. Check here for compatibility, diagnostics, and availability! (4/11/2020: Hi Everyone! I am still taking orders and replying to emails/PMs/etc, I appreciate your patience in these crazy times. Stay safe and healthy!) 82 300SD 145k 89 420SEL 210k 89 560SEL 118k 90 300SE 262k RIP 5/25/2010 90 560SEL 154k 91 300D 2.5 Turbo. 241k 93 190E 3.0 235k 93 300E 195k |
#3
|
||||
|
||||
thank you james, i have down loaded every thing you gave me to look at but i found nothing that would tell me the value of an item, for instance the air intake sensor when tested in my house started at 1.607k and slowly rose to 2.090 and still on the rise. the temp in my house is at 68%F if i hold the probe tip it falls to 1.520 and falling. So my consern is its accuracy. I have been told it has an effect on the fuel mixture, as dose the water temp sensor. again thank you for the information. Memory (JNT)
|
#4
|
|||
|
|||
Quote:
Good luck. R |
Bookmarks |
|
|