|
|
|
#1
|
||||
|
||||
Exterior Lamp Failure Monitoring Module
Ok, now that I can partially read a wiring diagram, it seems that every exterior light passes through this "Exterior lamp Failure Monitoring Module", Does this mean that this MODULE also handles the signal/hazard blinker circuitry? I don't see any separate control boxes on the diagram.
Oh wait... as i type this I see a "Combination Relay"... so which is responsible for the blinkers? Can I bypass the "Failure Monitoring Module" altogether? What is this module responsible for aside from a Bulb Out warning?
__________________
85 190E 2.3(SOLD) 86 230E (-->300D) sold 87 300D (-->300TD) sold 68 250S w/ a 615 and manual tranny (RIP) 87 300TD (SOLD) 95 S280 "The KRAKEN" (Turbo 2.9 602 transplant) traded 86 190E 2.3... current project |
#2
|
|||
|
|||
Lamp module ONLY monitors current consumption on each lighting circuit.
Then turns on the bulb-out lamp if needed.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
Thanks! That's one less module to worry about.
__________________
85 190E 2.3(SOLD) 86 230E (-->300D) sold 87 300D (-->300TD) sold 68 250S w/ a 615 and manual tranny (RIP) 87 300TD (SOLD) 95 S280 "The KRAKEN" (Turbo 2.9 602 transplant) traded 86 190E 2.3... current project |
Bookmarks |
|
|