Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 03-02-2002, 06:19 PM
Join Date: Feb 2000
Location: seattle, wa
Posts: 87

you can get a used head for $200-$300.have the machine shop pressure test and surface it and replace the guides,grind seets,and reuse valves if they're still good. you should be good for another 100k or more. should cost around 500 in labor,200-250 in parts( guides,gasket set,seals,coolant,oil,etc) if you don't need new valves and about 300-400 in machine shop labor.....paul
Paul Roberts
Mercedes Centrum Inc.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
1978 300d Cyl Head availability & $$$$ ajb Diesel Discussion 4 01-12-2005 04:40 PM
M103 Head Studs vs. head bolts Motor Head Performance Paddock 25 09-04-2004 12:12 PM
M103 head r&r progress sixto Tech Help 1 05-29-2003 07:36 AM
Sharing experience with cylinder head on 103 motor (1986 300e) marinmbfan Tech Help 13 08-06-2002 05:34 PM
Cracked Head 260E Scotty Tech Help 5 03-02-2002 10:47 PM

All times are GMT -4. The time now is 08:14 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page