Hey all;

I pulled the cluster today to figure out why my cluster and console lights don't work. When I pulled the cluster, I made note of which wires/bulbs went in which holes for each dummy light. I noted that the lines are numbered, and were out of order, as follows, on the right side of the cluster, progressing from right to left as you look at the cluster from the driver's seat: line 1 going to the first hole numbered 1; line 4 going to hole 2; blank (i.e. no line going to hole 3, line 5 going to hole 4; line 3 going to hole 5. The sixth hole had the bulb with wires soldered to the other (left) side of the cluster in it.

Is this correct, or should the numbered lines correspond with the number stamped in the metal plate on the cluster?

Thanks in advance!