![]() |
|
|
|
|
#1
|
|||
|
|||
Neutral Safety Switch Location
I have a 1994 C280 and am changing the Neutral Safety switch. I have the center consol out and looking at the shifter but That's as far as Iv'e gotten. I think it located on the right side of the shifter but can't see it. Any help would be great.
Thanks in advance Greg |
#2
|
|||
|
|||
Left side of trans..accessed from under chassis.
|
#3
|
|||
|
|||
Thanks for the quick reply. I'll let you know how it goes
![]() ![]() ![]() |
#4
|
|||
|
|||
Changed out the switch and now the car won't start. I think I didn't line something up. It pops out of Low Gear (2nd) and when I put it in park the key won't come out. I think the car thinks it's in reverse. Is there a certain way the switch should be in when it's installed?
Thanks Greg |
#5
|
|||
|
|||
<>
The arm on the NSS has a pin that has to line up with the lever hole that the pin fits into... Then the whole NSS can be turned for final adjustment before tightening the mounting bolts [ oblong holes here to allow for adjustment] http://catalog.eautopartscatalog.com/mercedesshop/sophio/image.jsp?title=Neutral%20Safety%20Switch&url=http%3A//img.eautopartscatalog.com/live/J405011778JLB.JPG Last edited by Arthur Dalton; 01-20-2007 at 07:43 AM. |
#6
|
|||
|
|||
Quote:
Now the only problem is the key won't come out of the ignition when the car is in park and the engine is turned off. Any ideas on that one ? Greg |
![]() |
Bookmarks |
|
|