Hello My 380sl wont start. I ordered a new fuel pump relay and no difference. I pulled out the ovp relay and the fuse is good but when I shake it something is rattling inside. Will the 380sl run without the ovp in place or do I have to jump the pins? I have fuel going into the fuel distributor and coming back out to the a/c line for cooling. Thank You!

i had that on my OVP relay ,red fuse was good ,insidethe solder joint was bad . re-soldered it was back to first time cold start
Ad

I believe it should start or at least sputter/try, but it will be very hard to keep it going until it warms up...depends a lot on the current mixture adjustment, if its on the lean side it probably won't run.

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 102k - mine - (OC-104,600)
'17 Metris(VITO!) - 26k - wifes (OC-25k)
'09 Sprinter 3500 Winnebago View - 57k (OC - 63k)
'13 ML350 Bluetec - 73k - dad's (OC-75k)
'01 SL500 - 92k(km) - dad's (OC-94,000km)
'16 E400 4matic Sedan - 122k - Brothers (OC-125k)