John, fuel pressure is measured at the cold start injector, approx 85 psi.
Also should deliver 1 Qt in about 25 seconds on the return line.

The distributor rotor should align with the punch mark on the outer housing.

Have you checked the over voltage relay?

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator

Bosch specs are 1L (or Qt close enough) in 40seconds for CIS-E...

Does the 4cylinder pump more volume than the 6cylinder CIS-E?
Just want to clarify since 25 vs 40sec is a big difference...don't want to have you spend money that is not needed!

__________________
2016 Monsoon Gray Audi Allroad - 21k
2008 Black Mercedes E350 4Matic Sport - 131k
2014 Jeep Wranger Unlimited Sahara - 62k
2003 Gray Mercedes ML350 - 122k