|
|
|
#1
|
|||
|
|||
c320 rear brake dust shield replacement
I need to replace my 2003 c320 rear brake dust shield. It looks like it is one piece requiring the hub to be removed. Is this a difficult project or something pretty easy? I tried removing the nut securing the hub but it did not want to turn. I decided to post to try and get help or advice before continuing. thank you kevin
|
#2
|
||||
|
||||
If you don't mind me asking, why do you need to replace it?
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#3
|
|||
|
|||
short story is we had winter rims on the car with the wrong bolts used. wheel came off and landed on the hub damaging the dust shield. as a result the drum brakes siezed and came lose in the drum.
|
#4
|
|||
|
|||
There are a few choices here, the non parking brake drum area of the shield can be straightened, the area under the parking brake shoes is complicated and difficult to straighten so not much damage here will warrant replacement.
The hub will need to be pressed out of the bearing to change the shield , this will destroy the bearing. A more direct and home garage friendly route is to purchase a complete used hub carrier that will include the hub , bearing, dust shield, parking brake shoes / hardware. Removal of the rear hub nut requires the locking tab to be bent back and substantial torque to be applied. Given your questions, this repair might be beyond your tools / resources. If you took it to a shop, ~ 1 1/2 hr should cover a complete hub carrier replacement. Go to car-part.com enter 2003 C320 , your metro area then look under " rear axle, stub only " This brings up many parts ranging from $ 300 at the " I think it is gold " to the $ 100 " this is what it is worth because it is a slow mover " yards to the $ 50 I'll sell at a good price to move material. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|