|
|
|
#1
|
|||
|
|||
OVP - wiring diag.
190E 2.3 16v, 1988 - I have the Mercedes workshop manual for the wiring diagrams for the W124,201 but can't find a diagram for the 9 pin OVP plug on the 16V. Not sure if the Diakom.ru diags (engine compartment cont. grids 8-11)are accurate as I am missing a red wire from pin 4 and only 8 of the 9 shown. Any help appreciated.
|
#2
|
|||
|
|||
Do you think someone stole it?
Did you consider the possibility that only 8 out of 9 pins are used? Is there a problem with the car?
__________________
600SEL '91 300E 4Matic '88 240D '83 280SE '77 350SE '73 The most complex systems can fail in the simplest way. Contra verbosus noli contendere verbis, sermo datur cunctis, animi sapientia paucis. i don't believe in the lord! He's never bought me a Mercedes Benz. |
#3
|
|||
|
|||
Found the relevant diagram and answered my question. All the pins on OVP relay/plug are used, I was checking the connections as the ABS light stays on after start up . As the car is stationary I believe the problem is with the OVP rather than sensors.
|
Bookmarks |
|
|