tranmission engage at idle - PeachParts Mercedes-Benz Forum

billwach · #1 03-15-2002, 10:39 AM

l987 190E. Thanks to all who have responded to threads...have
the 190E idleing properly, but when engaging auto tran into drive or reverse the idle drops 600-700 rpm and will die. It seems the
tourque convertor is not disengageing. Have adjusted the cable
that attaches to TB but can see no difference...can anyone shed
any light on this problem.

#2 03-15-2002, 01:21 PM

HAve you checked the Idle control valve?

billwach · #3 03-16-2002, 04:49 PM

Thanks everyone for the help...found 10AMP fuse blown behind the battery...everything, cold start valve, idle control valve, transmission engagement, all are working now. thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
'83 380 SL fast idle problem	Dorbell	Tech Help	3	08-23-2004 09:25 PM
380 Idle Control Valve Test	ctaylor738	Tech Help	5	01-23-2004 01:33 PM
my low, rough idle, stall, hot /start solution: E320/300	rvenerac	Tech Help	3	11-20-2003 09:59 AM
Return of idle problems - '91 190E 2.3	sbourg	Tech Help	11	05-19-2003 10:25 AM
300 SD idle screw	patsy	Tech Help	5	12-04-2000 06:02 PM