|
|
|
#1
|
|||
|
|||
hard shiffting
hi i got a 92 190 e 2.3 it shifts very hard out of first gear .I asked
some guys abouth it and thay told me thats the way 190's are? is there a way the ajust it to shift softer? |
#2
|
||||
|
||||
Im not an expert but it could be the vacuum modulator on your trans. I adjusted mine last week and now my shift points are soft but immediate. The modulator can also be checked with a vacuum pump to see if it holds a vacuum or not. do a search on the "vacuum modulator" you will find adjusting info there. However, It could also be that you are due for a trans fluid and filter change.
Good luck! Adam
__________________
Current Stable: 01 ML55 AMG 92 500E (a few mods) 87 300E (lots of mods) 00 Chevy 3500HD Diesel Box Truck 68 18' Donzi Marine 06 GT i-Drive7 1.0 Mountain Bike (with GPS!) PREVIOUSLY OWNED:83 300SD, 87 420SEL, 88 420SEL, 90 420SEL, 86 560SEL, 86 190E 2.3-16V AMG, 94 E320 |
#3
|
|||
|
|||
Mine had a new transmission only 4000 miles ago, and it does shift hard from 1st to 2nd, and I think it's the way they are. The auto specialist did, however, adjust the vacuum so that it would rev more and was less sluggish.. though I am not sure if this would have affected the shifts.
later Russ
__________________
190E's: 2.5-16v 1990 90,000m Astral Silver 2.0E 8v 1986 107,000m Black 2nd owner http://www.maylane.demon.co.uk/190esmall.jpghttp://www.maylane.demon.co.uk/190esmall2.jpg |
#4
|
||||
|
||||
For what it's worth.
When I first got my '93 300E two years ago the 1st to 2nd gear shift was very abrupt. My mechanic adjusted it by tweaking something under the car. He had to adjust it several times over several visits but it eventually became as smooth as silk He said that it had to do with individual driving styles At any rate, it worked and it's all that matters
__________________
Reno '93 300E 4Matic '98 Nissan Altima '00 Yamaha Road Star Silverado |
#5
|
|||
|
|||
If your 2-3 and 3-4 shifts are OK one should be carefull of too much modulator reduction. Harsh shifts are better than sloppy ones (from the transmissions view point).
I would make as much as one turn counterclockwise on the modulator key. I also would first be sure that you are not shifting too late into second. The adjustment is to the control pressure cable and has a thumb wheel that can be reached without removing the aircleaner. You should try and make the shift earlier which will require lengthening the cable. The 190 has a screwy adjustment that is hard to see what you are doing but is easy once you get it. Since it is easier and might offer the best solution I would go there first.
__________________
Steve Brotherton Continental Imports Gainesville FL Bosch Master, ASE Master, L1 33 years MB technician |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hard fuel lines leaking. | Hatterasguy | Diesel Discussion | 21 | 06-15-2005 10:23 PM |
An $800 hard drive. (why I hate working on PC's) | Diesel Power | Off-Topic Discussion | 28 | 06-01-2002 10:59 PM |
Hard shiftin' SDL | turbodiesel | Diesel Discussion | 3 | 05-17-2002 08:48 PM |
Is SL glass roof noisier than regular hard top? | John Carver | Mercedes-Benz SL Discussion Forum | 1 | 05-10-2002 05:38 PM |