|
|
|
#1
|
||||
|
||||
Thermo vacuum switch slant full vac?
Quote:
Theres that great diagram again, slant is on left inn diagram so it appears egr goes on temp controlled side I'll have to check mine but it may be switched... I'll do it if its the case just need to be careful as it could break as the other one did & I had to have that one replaced. This one is the old one that goes to egr & throttle . It appears on is slant & one is straight but it could easily be reversed if it got screwed in opposite. So standard straight is full vac generally on right??? Ok need to switch egr port. Least I have something to work with & hope it make is run better. Do these things go bad? The one on the outer side is new but the one e the egr is old & I told my mech to change those black vacs but I don't think he did...They look to be marked by me w aO that meant old so I'll have to replace those. Wish me luck I'm brining out the hot hairdryer...on a Friday night.
__________________
~Shadow~ 83 500 SEC Euro 198K |
#2
|
||||
|
||||
5 hrs of surgery
replace the black hoses on right TVV switch. They were hooked u p ok with EGR on straight temp controlled p[ort except my valve is installed backward...straight side on outer side not inner side as in diag. Ran a new egr line so thats all new. Got all vac hoses changed & tightened except ones to/from under throttle body & don't have access to. Went well as w the hairdryer no broken plastic posrts Yeah. Now still need to know where & what that black can is & where it goes.
__________________
~Shadow~ 83 500 SEC Euro 198K |
Bookmarks |
|
|