transmission on a 124.128

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
transmission on a 124.128

08-01-2013, 11:08 PM

vaccin

Registered User

Join Date: May 2013

Location: upper continent and north.

Posts: 27

transmission on a 124.128

This is a seal replacement at the rear servo cylindrical disk which is on the right rear side of the transmission. The cylindrical disk is easily pushed in and does not press hard against the outer lock ring. I have a steady flow of oil out through the servo.
edit:I forget the last sentence sorry. The cylindrical cover can easily be pushed in without an noticeable pressure on the rear servo, Is this normal and is this procedure possible with the trans bolted in.
This is a 722.4 thanks

Last edited by vaccin; 08-02-2013 at 12:24 AM.

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

All times are GMT -4. The time now is 09:39 AM.