|
|
|
#1
|
|||
|
|||
Oil Filter Wrench 2007 w203 c230
What is the correct oil filter wrench to remove the cap on a 2007 w203 c230? Im looking for the ones that you can get at the local parts store.
__________________
'85 300D Cal 280,000 miles '14 GLK 350 60000 miles Last edited by my123ca; 12-09-2013 at 08:36 PM. Reason: Added model year |
#2
|
|||
|
|||
FYI. I used a 76mm 14 flute oil filter wrench. Brought the cap to Pboys. It was a little loose but it worked. Bought the silver colored one not black. I could have done it by using the plier type which i had but there was a torque spec for the cap.
These cars dont have any place to put the jack stands. You have to remove a cover to get access to the oil pan. Best bet is to use an evacuator-suction through the dip stick tube.
__________________
'85 300D Cal 280,000 miles '14 GLK 350 60000 miles |
#3
|
|||
|
|||
all mercedes have the round jack pads under the jack hole points on the sides of the car.
__________________
2012 BMW X5 (Beef + Granite suspension model) 1995 E300D - The original humming machine (consumed by Flood 2017) 2000 E320 - The evolution (consumed by flood 2017) |
Bookmarks |
|
|