CAN removal with bad consequence

		PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help
CAN removal with bad consequence

LinkBack

Thread Tools

Display Modes

08-27-2014, 04:40 AM

dhillman

Registered User

Join Date: Aug 2003

Location: San Juan, PR-USA

Posts: 96

I just charge the battery, it went up from 9.95V to 12.48V as per the Fluke meter and 13.1V as per DAS. Again same message, "communication error with the control unit". It seems like N3/10 is fried. I also tested the battery with my Snap-on instrument, and it tested good at 12.48V and 698 CCA AFTER Charging. Can I open the ECU to inspect it visually? Any thoughts are welcome.

Darrel

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is On Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

All times are GMT -4. The time now is 06:20 AM.