Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-24-2014, 06:13 PM
Registered User
 
Join Date: Nov 2014
Posts: 3
93 190 e 2.6

How do I reconnect the recerculation tube that goes from exhaust manifold egr valve over to the intake? I cannot get that dang fitting on the intake side, underneath, to start for nothin! Help!
Reply With Quote
  #2  
Old 11-24-2014, 11:23 PM
Senior Member
 
Join Date: Nov 2002
Posts: 692
loosen it at the egr, don't remove it. there's also a clamp at the back, i forget where. it's tough but it can be done. unless, it's been off before and bent. good luck, chuck.
Reply With Quote
  #3  
Old 11-25-2014, 04:54 PM
Registered User
 
Join Date: Nov 2014
Posts: 3
Can the car be run without the tube? Cap off the ends?
Reply With Quote
  #4  
Old 11-25-2014, 06:41 PM
Senior Member
 
Join Date: Nov 2002
Posts: 692
you have to plug the manifolds. otherwise, big vacuum leak and lotsa exhaust noise and it won't pass emissions. good luck, chuck.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 08:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page