|
|
|
#1
|
|||
|
|||
Part number needed
In the process of trying to fix the locks on my 92 w201 I managed to break the plastic part that holds the upper lock rod and vacuum rod to the lock arm on the latch.
Here's a pic link from the Pelican DIY. Sorry I couldn't figure out how to imbed the photo. It's the black plastic part that I'm after. http://www.pelicanparts.com/techarticles/Mercedes-190E/13-BODY-Front_Door_Latch_and_Vacuum_Element_Replacement/images_small/pic21.jpg Thanks in advance. |
#2
|
||||
|
||||
I got mine from a junk yard. Good luck
__________________
1990 190E 3.0L |
#3
|
||||
|
||||
Eewwww!
That one little sucker takes the place of a Bushing and one or possibly 2 circlips.
I've LOOKED in the EPC , and I can't find it in the Pictograms. (No Mystery there) Shoot Roy an e-mail and ask.
__________________
'84 300SD sold 124.128 Last edited by compress ignite; 01-27-2015 at 04:12 AM. |
#4
|
||||
|
||||
EPC lists this part number, but it looks different:
A0079884278
__________________
Prost! |
#5
|
|||
|
|||
That's the same number I came up with from the EPC..
But as you say it looks different.
Sorry for my ignorance, but who is Roy? |
#6
|
||||
|
||||
No Questioner is EVER Ignorant
Member WHunter on this forum (AKA Roy)
[He's kinda like the God father of what you may think is an Un-Obtainable part.] __________________________________________________________ Hirnbeiss, Thanks! So, what's the Determining Factor for you if it Looks different?
__________________
'84 300SD sold 124.128 |
Bookmarks |
|
|